|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/3-stories-building-design-in-etabs-and-safe-beginning-to-end/
课程评论：没有评论
以下是Coursera课程“ETABS和SAFE中的三层建筑设计：从入门到精通”的中文内容摘要： 本课程将引导您完成使用ETABS和SAFE进行钢筋混凝土建筑建模、分析和设计的全过程，旨在为您打下坚实的基础，成为一名优秀结构工程师。课程内容涵盖： 1. **图纸获取与初步规划：** 从AutoCAD获取建筑平面图，并确定柱和梁的布置。 2. **ETABS建模：** 在ETABS中完成三层建筑的建模，包括楼梯的建模。 3. **材料属性定义：** 定义混凝土和钢筋的属性。 4. **荷载定义与施加：** 定义和施加各种荷载，包括恒荷载、活荷载、屋顶活荷载、X向和Y向地震荷载、X向和Y向风荷载，以及由位移引起的地震效应。 5. **荷载效应分析：** 分析各种荷载作用下建筑物的响应。 6. **结构不规则性校验：** 进行结构在竖向和水平方向上的各种不规则性检查，确保设计方案符合规范要求。 7. **结构构件设计：** 进行梁、柱、楼板和基础（筏板基础）的设计。 8. **优化与失效构件重设计：** 对设计中失效的构件进行重新设计。 9. **详图设计：** 使用ETABS CSI Detailing 进行梁和柱的详图设计，以及使用CSI SAFE 进行楼板的详图设计。 10. **楼板和基础设计：** 在CSI SAFE 中完成楼板的分析与设计，以及筏板基础的建模、分析与设计。 11. **楼梯设计：** 使用Microsoft Excel 进行楼梯的分析和设计。 本课程将依据ACI和ASCE建筑规范进行讲解，强调结构分析和设计原理的重要性。完成本课程后，您将有信心独立设计实际建筑项目。
This course, "3 Storey Building Design in Etabs and SAFE beginning to end," will guide you through all the steps that you need to know in order to properly model, analyze, and design a reinforced concrete building.This course will lay the foundation for you to become a good structural engineer. I have taken my time to walk you through all the steps.You need to know that there is a Gap between what you learn in school and what is done on a construction site. This is why after you Bachelor's and Master's, you try to enroll in one or two internship programs or buy courses online; so that you can learn from experienced Engineers who are already working in the construction world.This course will walk you through:1. Getting the Building plan from Autocad.2. Deciding the Column and Beam positioning.3. Modelling the Building in Etabs.4. Modelling the Staircase.5. Defining the Concrete Properties and Rebar Properties6. Defining the Load Patterns (Dead load, Super Dead load, Live load, Roof live load, Earthquake load in x and y directions, wind load in x and y directions, then finally the earthquake due to drift.7. Applying the Various loads (Super dead load, Live loads, Earthquake Loads, and Wind Loads) to the building.8. Analyzing the Effects of these loads on the building.9. Various Structural Vertical and Horizontal Irregularities checks that need to be done so that the building passes those checks.10. Designing the Building.11. Redesigning the failed members in the building.12. Detailing of the Beams using Etabs CSI Detailing.13. Detailing of the Columns using Etabs CSI Detailing.14. Analysis and design of the Slab in CSI SAFE.15. Detailing of the Slab in CSI SAFE.16. Analysis and Design of the Staircase in Microsoft Excel.17. Modelling the foundation (Mat Foundation) in CSI SAFE.18. Analysis of the foundation (Mat Foundation) in CSI SAFE.19. Designing the Foundation (Mat Foundation) In CSI SAFE.Using the ACI and ASCE Building Code.The Code doesn't make much difference. The knowledge of the building analysis and design will make the difference. You just follow your building code guide with the knowledge and understanding you have already gained from this course.You will be confident enough to design a real life building by the time i walk you through all these steps.See you soon!
