|
所在平台: CourseraArchive 课程类别: 其他类别 大学或机构: CourseraNew |
课程主页: https://www.coursera.org/archive/sensors-circuit-interface
课程评论：没有评论
University of Colorado Boulder
In module 1 you will learn how to specify and use temperature sensors in an embedded circuit. First, you will learn about common types of sensors and actuators found in common products such as smart phones and automobiles. Then you will get a high-level overview of analog and digital interfaces, followed by a deep dive into thermistors, RTD’s, and thermocouples. For each of these three types of thermal sensors, we define the core theory and formulae, give you examples of how commercial sensors are packaged, and explain what you need to know to purchase them on a web site.
This course can also be taken for academic credit as ECEA 5340, part of CU Boulder’s Master of Science in Electrical Engineering degree. After taking this course, you will be able to: ● Understand how to specify the proper thermal, flow, or rotary sensor for taking real-time process data. ● Implement thermal sensors into an embedded system in both hardware and software. ● Add the sensor and sensor interface into a microprocessor based development kit. ● Create hardware and firmware to process sensor signals and feed data to a microprocessor for further evaluation. ● Study sensor signal noise and apply proper hardware techniques to reduce it to acceptable levels. You will need to buy the following components to do the two course projects based on the videos in this module. Note that if you have already purchased the PSOC 5LP PROTOTYPING KIT, you do not need to buy it again. These parts may be purchased off the Digikey web site, www. Digikey.com. Or, you may obtain the specs from the site, and purchase them elsewhere. These are the part numbers typed out, so you can copy and paste them into the Digikey web site. You will need one of each part. 428-3390-ND NHD-0216BZ-RN-YBW-ND 570-1229-ND A105970CT-ND
